Localization at the Lime Kiln acoustic observatory
In 2009, a new hydrophone array was deployed in Lime Kiln State Park as part of the SeaSound project of The Whale Museum. Here we describe the array and track our efforts to localize sounds within it.
The array consists of two experimental nodes: a northern one with hydrophones mounted on cement-filled tires and spaced ~8m apart; and a more rigid southern one also with 4 hydrophones, but located ~400m along-shore. The north node also hosts a Reson hydrophone that is calibrated and has a flat response over the full range of frequencies in killer whale calls, whistles, and clicks.
Chronology:
- July 19, 2009: deployed hydrophones 3 and 4 of the north array
- July 20, 2009: secured new intertidal cable protectors
- July 25, 2009: deployed hydrophones 2 and 1 of north array
Locations (WGS84):
Remember: hydrophone
- North Array located ~ N 48.51564, W 123.15326
- ,x,y,z
4,?,?,-30 feet 3,?,?,-35 2,?,?,-44 1,?,?,-57
- South Array located ~ N 48.51306, W 123.15011
- Lime Kiln light house ~ N 48.51578, W 123.15261
Lime Kiln bathymetric profile:
The blue line represents the average bathymetric profile off-shore of the Lime Kiln lighthouse. The red trace is the bottom from a single pass with downward looking 200kHz Biosonics echosounder. Bob Otis says that orcas typically are 100-300m offshore when they pass the lighthouse.
